Directions: Obtain the RMTC Industrial Trades Orientation Packet from the front desk at the RMTC. Read and sign the agreement. After completing all steps in the packet, including reviewing the online orientation below, turn the agreement in to registration desk staff at the time of enrollment.
Regional Manufacturing Technology Center
The Regional Manufacturing Technology Center (RMTC) is a regional campus for Kellogg Community College (KCC). Both the Industrial Trades and Workforce Solutions programs are headquartered at the RMTC.
Industrial Trades Programs
Industrial Trades Programs are offered at:
- the RMTC (Battle Creek, MI)
- Industrial Welding
- Industrial Machining Technology
- Industrial Electricity and Electronics
- Industrial Technology
- Industrial Heating, Ventilation, Air Conditioning and Refrigeration (HVAC-R)
- Industrial Pipefitting
- Renewable Energy
- Industrial Tool & Die
- the Branch Area Careers Center (Coldwater, MI)
- Industrial Electricity and Electronics
- Industrial Machining Technology
- Industrial Technology
- Hastings High School (Hastings, MI)
- Industrial Welding
The Industrial Trades Programs are provided in a non-traditional format, which is often described using terms such as open entry open exit, modular, and competency-based. To learn more about the open-entry open-exit format go to the Industrial Trades page on the website.
Kellogg Community College
Since Industrial Trades students are KCC students, all policies and procedures which apply to KCC students also apply to Industrial Trades students. KCC policies and procedures are discussed within two KCC documents – the Student Handbook and the Academic Catalog. To learn more about programs, services, and extra-curricular activities available at KCC, take the Online Student Orientation. All RMTC students must apply to KCC. Students may complete the online Application for Admission.
Location and Parking
The RMTC is located in Fort Custer Industrial Park just west of Battle Creek. Maps to the RMTC are located online and in the RMTC program guide. There is plenty of parking at the RMTC. No parking permits are required.
The first stop at the RMTC should be the registration desk in the front office. Registration staff help students with orientation and registration. If no registration staff are available, go through the doorway into the Resource Center and request assistance from Resource Center staff.
All students are required to register for Industrial Trades modules online using the Self Service system, located in the Bruin Portal. Click here for instructions on how to register.
Wait! Sponsored students must have a Student Sponsored Billing Authorization on file at the RMTC prior to registering for modules. Check with registration staff to verify billing authorization status.
K-IDs and Computer Usage
All KCC students are assigned a student ID number also referred to as a K-ID (or KCC ID number). The K-ID number should be used in place of a social security number on all KCC documents. Resource Center staff can assist students with K-ID number questions or problems.
The K-ID number is also required for email, Internet access, and the time clock. Resource Center staff can assist students with accessing email and the Internet. All KCC students must abide by the KCC Acceptable Use Policy when using KCC computers. Please read this policy prior to accessing online services.
Students will use the Web Portal to access the Kellogg Registration and Information System (KRIS). Students will use KRIS to register for classes, access online classes, print class schedules, print sponsor progress reports, and look up grades. Click here for instructions on using KRIS.
Instructions for Calculating Credit
- Get a copy of the lab schedule online under Industrial Trades Important Documents.
- From the lab schedule, get the Industrial Trades semester end date.
- Count the weeks from your start date to the date classes end.
- Determine how many hours per week you plan to attend school.
- Multiply the number of weeks by the number of hours you plan to attend. This is the total number of contact hours you will complete in the semester.
- Divide this number by 24 (24 contact hours equals one credit hour).
- This is the total number of credit hours you should register for in the semester.
Using your program outline count the number of credit hours for the next consecutive modules.
16 X 5 = 80 ÷ 24 = 3.33 You should register for modules INEL 05 050 through INEL 15 090. Total registered credit hours for the semester would equal 3.41.
Students may drop RMTC modules as much as they want up until the first day of the semester with no fees or consequences.
After the first day of the semester, students must request permission to drop modules. Modules will be dropped by front desk staff manually, upon request.
After 90% of the semester is complete, students may not drop modules. Students will receive an incomplete or letter “I” grade for each module not completed by the end of the semester.
Self Pay Students
Self-pay students are students who are paying for their own education with cash, credit, scholarships, loans, or financial aid.
How much a self-pay student can afford to register for and when a self-pay student may register depend on the type of funding he or she is using. Registration staff can help students determine how many modules to register for at one time and when those modules need to be completed.
Self-pay students must carry their Class Schedule at all times. Self-pay students will be required to present their Class Schedule to Resource Center staff in order to get module packets and to instructors in order to work on modules in the training labs. Students will not be allowed to start modules without a Class Schedule. Click here for instructions on accessing class schedules.
Self-pay students must officially drop modules, which they do not intend to complete. These modules must be dropped prior to the drop deadline, which is approximately two weeks from the end of the semester. Students who fail to drop or complete modules by the end of the semester, will earn an incomplete or “I” letter grade.
The Academic Appeals committee must approve all refund requests made after the drop deadline. To request a refund, talk with an RMTC staff member.
Many RMTC students may be eligible for financial aid. In order to determine whether or not you are eligible, you must complete a Free Application for Federal Student Aid. This form is referred to as the FAFSA. Information provided on this form will be used to determine what type of aid you are eligible to receive. All RMTC students are encouraged to communicate directly with the Financial Aid Office if they have questions or concerns regarding their financial aid.
For more information on financial aid visit the Financial Aid Office on the main KCC campus in the Student Center (which is marked as SC on the map below). Or call Financial Aid at 269-965-4123.
Responsibilities of the Student
- Acquire necessary forms to complete the financial aid file. Links to all required forms are provided to students in the Financial Aid Self Service section when logged into their Bruin Portal upon receipt of the processed FAFSA information. If the forms are misplaced, the student may access them online at: http://www.kellogg.edu/admissions/financial-aid/student-forms-documents/.
- Complete and return all required forms to the Financial Aid office to complete the financial aid file as soon as possible.
- Maintain Satisfactory Academic Progress, as outlined in the Satisfactory Academic Progress section.
- Meet all deadlines as established by the institution each academic year.
- Read all information provided by the Financial Aid office (provided through KCC email account and the Financial Aid Self Service section of the Bruin Portal).
- Maintain a file of all correspondence to and from the Financial Aid office. This would include application information, appeal requests, award letters, promissory notes, employment information, etc.
- Report outside sources of financial aid to the Financial Aid office in a timely manner.
- Report changes of name and/or address to the Records office.
- Be aware of your payment obligations to the college and the status of your financial aid. Continue to meet your payment deadlines, whether or not your financial aid has been processed.
Enrollment Levels for Financial Aid
(all semesters including summer semester)
Full time 12 or more credit hours
3/4 time 9 – 11.99 credit hours
1/2 time 6 – 8.99 credit hours
Less than 1/2 time Less than 6 credit hours
If you add or drop classes after financial aid has been disbursed for the semester your enrollment level will determine if you owe KCC additional funds or if you receive additional financial aid.
Any courses for which there is an “I” grade on your transcript for a previous enrollment period will not be counted toward your level of enrollment for a current semester for financial aid. An “I” grade means you agreed to complete the course by a specified date without re-enrolling for the class.
Students Who Fail to Attend Class (“No Show”)
Students are required to attend class to be considered eligible for financial aid disbursement. Financial aid disbursements will be adjusted for those students who receive financial aid for classes not attended. The Financial Aid office will make all necessary adjustments once the instructor submits notification to the Financial Aid office of non-attendance. Adjustments may create a balance due on the student account. Students must contact instructors to resolve disagreements regarding attendance.
Instructors report all students who have not met the above requirement to the Financial Aid office. Financial aid will be adjusted excluding credits for the class(es) reported as “no show(s).” These adjustments may result in a reduction or cancellation of financial aid for the semester. Balances due to Kellogg Community College are the student’s responsibility.
Satisfactory Academic Progress
To remain eligible for state and federal financial aid programs, students need to make Satisfactory Academic Progress toward achieving a degree or certificate. Standards of Satisfactory Academic Progress are applied to all students who wish to establish or maintain financial aid eligibility at Kellogg Community College, regardless if they have received financial aid funds in the past.
Industrial Trade classes are treated like regular courses during the semester for which the student registers. Students must complete all course work by the published last day of the semester when Satisfactory Academic Progress (SAP) is evaluated. Those classes not completed will be counted as attempted and not completed. If the student is placed on probation or suspension due to non-completion, once the course is complete and a grade is assigned, the student may complete a Satisfactory Academic Appeal form to request a re-evaluation of SAP progress. All Industrial Trade courses receive a grade of “P” upon completion. This grade is factored in as a 2.0 GPA for SAP purposes. For more information see http://www.kellogg.edu/financial/pdf/SatisfactoryAcademicProgressPolicy.pdf. Students must participate in these courses with completed assignments to be considered eligible for financial aid.
Contact the Financial Aid office by phone, fax, email, in person, or visit us on the web
Calculating Financial Aid Awards for Registration
Student financial aid award amounts available for registration are dependent upon the amount of credit the student registers for in a given semester.
As Industrial Trades students may register at any point during the semester, the number of credits they are able to complete prior to the end of the semester will dictate the amount of the award they receive. Refer to the Instructions for Calculating Credit.
Once students have determined the number of credits, they should calculate the total cost (lab fees and tuition) for those credits.
Then students may go to the Pell Grant Calculator on the Financial Aid Website:
Students may enter the EFC amount, number of credit hours, and click on Calculate. The calculator will provide the amount of the award available for registration.
Students should match this amount with the total cost of the credits.
Sponsored students are students whose training is paid in full by a third party (either a company or an agency). Once the training program is setup and authorized by the sponsor the student may register for classes.
Sponsored Student Billing Authorization
Sponsored students must have a current Student Sponsored Billing Authorization on file before registering for classes. Billing authorizations for the next semester are due by the last day of classes in the current semester. The last day of classes for each semester can be found in the Academic Calendar. Allow at least two weeks for the billing authorization to be processed.
Sponsors often require periodic updates on student progress. Sponsored students will sign a statement releasing confidential information to their sponsor.
This will authorize the College to release information on the students’ academic attendance, integrity, and hardship within the authorized modules.
Sponsored students will also sign a statement releasing grades to their sponsor. This will authorize the College to release student progress reports at the end of the semester.
The authorization will list the modules the student is allowed to register for during the semester.
Students who register for modules which are not listed on the authorization will be charged for those modules.
Students who register for classes prior to the billing authorization being processed or who register for modules which are not listed on the authorization will be dropped from those modules within 24 hours for nonpayment.
Student Progress Reports
The College will send a progress report to the authorized representative of the sponsor at the end of the semester. If the sponsor requires more frequent progress reports, the student will be required to provide them to the sponsor. Student progress reports are available at any time via KRIS. To access, go to KRIS for Students, then Academic Profile, then Sponsored Student Program Report.
The Resource Center is central to training at the RMTC. This is where students pick up module packets and materials, study, take tests, watch videos, and use the computer lab for accessing online or CD-ROM content.
A current printed schedule is required in order to obtain module materials.
All module materials must be returned to the Resource Center prior to taking a test. Only selected books will be permanently issued to students. Resource Center staff will explain which materials students may keep and which materials students must return.
Cell phone usage is not allowed in the Resource Center. Keep discussions to a minimum. Be mindful of other students who are studying or taking tests.
Your RMTC program is divided into units of study. Each program has a different number of units. Units are numbered consecutively using two digits (05, 10, 15, etc). There can be anywhere from one module to 20 modules within a unit of study. Modules are numbered consecutively using three digits (010, 020, 030, etc).
There is a packet for each RMTC module. Module packets are colored by program and labeled by module number and module title. Module numbers are listed on your program sheet. You should use the module number and your printed class schedule when requesting a module packet and materials. For example, “the test for INEL 05 010.”
Each module packet includes an objective sheet with a learning objective, a list of learning activities, a description of check out activities (or assessments), and the minimum score required to pass the module.
Questions pertaining to module content should be addressed to the program instructor. General questions pertaining to module materials such as availability or missing documents may be addressed to Resource Center staff.
Final Assessments and Grades
The RMTC is a for-credit, performance-based program. This means that students must meet minimum performance requirements in order to pass a module. Minimum performance is measured by an activity or assessment. These may be lab activities, other activities and/or written tests. Students must score either an 80%, 90%, or 100% depending upon the activity/assessment.
All lab activities must be performed in the training lab under the supervision of the instructor.
All written tests must be taken in the Resource Center under the supervision of Resource Center staff. No written test can be taken out of the Resource Center. Written test answers should be recorded on a separate sheet of paper. Please do not write on the test itself. After completing a written test, return the test form to Resource Center staff and take the answer sheet to the instructor for grading.
Please note: Electricity/Electronics written tests are taken in the Electricity/Electronics lab if taken during open lab hours. Otherwise, students should take the test in the Resource Center.
Note: It is the student’s responsibility to check with the instructor to ensure he/she passed the test.
The instructor will grade the lab activities and written tests. When the student achieves the minimum score on all activities/assessments, a Pass or “P” grade will be applied to the student’s transcript.
Students will receive one of three grades for each module:
P (Pass) – Indicates students have successfully completed the module(s)
I (Incomplete) – Indicates students have failed to complete the module(s)
N (No Pass) – Indicates students have not passed the module(s) within a course specified time frame or attempt (i.e. certifications, work based learning modules or other modules)
RMTC students are allowed one year from the end date of the semester to complete incomplete module(s).
If students fail to complete the module(s) within one year, the I grade(s) will be permanently posted to their transcripts.
Incomplete grades and/or No Pass grades could negatively impact your financial aid.
Refer to the KCC Academic and Refund Appeal Form for information on how to appeal an incomplete grade after the one year incomplete period or speak with the Director of the Regional Manufacturing Technology Center.
It is very important that students meet with their instructors immediately and make arrangements to complete the module(s) as soon as possible.
If students disagree with the grade(s) awarded, they may contact their instructors to resolve the issue.
Financial aid and certain sponsored students are required to punch in and out on the time clock each time they visit the RMTC. Both sponsors and the Financial Department expect students to use the time clock honestly and ethically.
Each Industrial Trades Program has one training lab in which students complete hands-on learning activities using specially designed trainers or real-world equipment. The training labs are shown below.
Hours of Operation
As an open entry open exit facility, the RMTC is open year round with exceptions for holidays, general session, interim session, spring break, and summer break or other college closing dates. RMTC closures will be published on the Lab Schedule. Printed copies of the Lab Schedule are available at the Registration Desk, the Resource Center, and are posted throughout the facility.
Each program is open two nights per week. Check the Spring 2018 RMTC Lab Schedule for evening lab hours.
Sign up for campus alerts to determine if the RMTC is closed. For more information on the types of campus closures or where to find campus closing information, refer to the Student Handbook.
Training Lab Guidelines
The equipment and materials used in the training lab may be dangerous. Training modules will review safety procedures. The following lab guidelines apply to all RMTC students:
Safety glasses must be worn in designated areas.
Wear appropriate clothing. No open toe or open heel shoes, no jewelry, and no loose hanging clothing.
Talk with an instructor before operating equipment, tools, or machines.
Report all broken tools or equipment to the instructor so they may be repaired or replaced. Failure to do this may result in critical injury.
Immediately report all injuries to the instructor.
Students are not allowed in the training labs when the labs are officially closed. The training labs are officially closed between noon and 1:00 p.m. for lunch.
Equipment and trainers are available on a first come, first serve basis. Anyone leaving a workstation without notifying the instructor can lose that workstation.
Students must clean their workstations when finished. This includes taking care of scrap materials and returning all tools and equipment to the tool crib or the instructor.
Industrial Trades Instructors
Any problems, questions, or concerns with learning activities or checkout activities should be immediately addressed with the program instructor. Program instructors are available during the day Monday through Thursday or by appointment.
Kevin Barnes, Industrial Electricity and Electronics and Renewable Energy Instructor
Tim Krueger, Industrial Technology and Instrumentation Instructor
Shane Bresson, Industrial HVAC-R and Industrial Pipefitting Instructor
Jason Moore, Industrial Machining Technology and Industrial Tool & Die Instructor
Steve Casselman, Industrial Welding Instructor
Selected tools and materials are available in Tool Crib. Students must sign tools in and out using the sign out sheet.
A Tool Crib Attendant may or may not be on duty. Check with the instructor before going to the Tool Crib. If no Tool Crib Attendant is on duty, the instructor will retrieve the necessary tools. Under no circumstances should students enter the Tool Crib without instructor supervision.
Basic amenities are available for students. There is a break room with vending machines and various classrooms for quiet study areas. Please remember the RMTC is a smoke free facility. Smoking is only allowed outside the south entrance of the building. Tables are available for your convenience.
Prior Experiential Learning and Transfer Credit
Instructors may determine that a student already possesses the knowledge, skills and abilities required to pass a module. This is called Prior Experiential Learning Credit. Students who wish to receive Prior Experiential Learning Credit must verify skill attainment with the instructor by either taking the final assessment activity, providing prior training documentation, or presenting a letter from a supervisor. There is a minimal fee for processing credit for prior experience.
Students who would like to have credit transferred from a previous school to KCC, must have an official transcript sent to KCC. Contact the previous school to get information on forwarding transcripts to KCC. Once received, the transcripts will be reviewed by a program instructor. Students will receive KCC credit for classes from the previous school which are equivalent to KCC modules and which meet the minimum grade requirement. For more information on transfer credit, speak with the Director of the RMTC.
Because the RMTC provides instructor facilitated training as opposed to instructor led training, there are more opportunities to violate academic integrity. However, violations of academic integrity will meet with harsh penalties and may result in academic suspension. For more information on academic integrity, please refer to the Policy on Academic Integrity in the Student Handbook.
College Credit and Graduation
All Industrial Trades modules are credit bearing. This means students earn college credit for each module they pass. This credit will apply towards a certificate and an associate degree. To learn more about earning a certificate or associate degree, ask to speak with the Director of the RMTC.
All RMTC students are encouraged to apply for graduation when they complete a certificate or associate degree program. Deadlines for graduation are posted on the KCC web site.
More manufacturers are requiring educational credentials for employment. In order to graduate and obtain an official certificate or degree from KCC, students must apply for graduation by completing an Application for Graduation. For more information on graduation and graduation requirements, refer to the Academic Catalog or talk with the Director of the RMTC.
The Bridge provides services to help students overcome training obstacles such as lack of study skills, learning disabilities, and personal issues. Services include:
- One-on-one tutoring
- Disability services for students who disclose a disability and provide appropriate documentation
- Financial assistance for special needs such as childcare and transportation
- Specialized training in reading, writing, math and study skills
For more information on these services see your Student Handbook or visit the The Bridge on the main KCC campus in the Student Center. Or call 269-965-4150.
Transitional Studies Program
Students who need to develop their academic skills in order to be successful in college can enroll in Transitional Studies courses. These courses are designed to help bridge the gap between a student’s current skill level and being college-ready.
Students who do not have strong math, reading, and/or English skills are strongly encouraged to take the COMPASS assessment to determine if transitional studies courses can improve their academic performance.
Main Campus Map
Most of the KCC services discussed in this orientation are provided on the main KCC campus. RMTC staff can help you locate departments on campus. Use this map to find the buildings in which those departments are located.
Tips for Success
In order to be successful at the RMTC, students should fully engage in the learning process.
Talk with the instructor. The instructor is available to explain concepts, demonstrate lab activities, and answer questions. Because of the open entry open exit format, the instructor doesn’t always know when students are having difficulties. Students must take the initiative to talk with instructors early and often.
Establish deadlines. Contact hours are provided for each module. Determine how many hours it will take to complete a program and set up an attendance schedule.
Let us know what you need. Feel free to talk with us about training and employment goals.
Thank you for selecting the RMTC.
We are looking forward to helping you succeed!
RMTC Interim Director